Product category

Contact Us

Tel: 0086-519-85858018
WhatsApp:+86-13306120917
Email: lena@chinasuma.com
Add: Liudao Industrial Park, YaoguanTown, Wujin District , Changzhou City , Jiangsu Province, China , 213102

Shopping Cart

Delete all items

Proceed to send inquiry

RIZ...G1G2 RIZ...G2G7 Freewheel Overrunning clutch

RIZ...G1G2 RIZ...G2G7 Freewheel Overrunning clutch

Types RIZ..G1G2/G7G2, RINZ..G5G5 Freewheel Overrunning clutches are centrifugal lift off sprag type freewheels with the inner race rotating from Suma bearing importer. Only the inner race is designed for freewheeling.

Inquire Now

Product Detail

RIZ...G1G2 RIZ...G2G7 Freewheel Overrunning clutch

Overrunning Clutch Feature

Types RIZ..G1G2/G7G2, RINZ..G5G5 are centrifugal lift off sprag type freewheels with the inner race rotating from Suma bearing importer. Only the inner race is designed for freewheeling.

These are self-contained units designed for overrunning clutch applications. Typically used in crawl drives, where the overrunning speed is high but the drive speed is low and does not exceed the maximum driving speed specified in the table. The overrunning clutches are type RIZ, RINZ (» see page 84 for more information) equipped with G type covers featuring a grease pocket and contact free seal. When ordered complete, the unit is delivered grease lubricated, ready for either horizontal or vertical installation.

Sizes of RIZ...G1G2 RIZ...G2G7 Freewheel Overrunning clutch

Type	Size		Speeds				Number				Weight
RIZ RINZ Overrunning clutch	d^H7	T_KN¹⁾	n_max²⁾	n_imin³⁾	n_imax⁴⁾	D_h7	z	L₁	L	t	G1
	[mm]	[Nm]	[min-1 ]	[min-1 ]	[min-1 ]	[mm]		[mm]	[mm]	[mm]	[kg]
	30	375	290	700	9000	100	6	68	43	3	3.9
	35	550	280	670	8500	110	6	74	45	4	4.9
	40	800	260	630	7500	125	6	86	53	4	7.5
	45	912	255	610	6700	130	8	86	53	4	7.8
	50	###	235	560	6000	150	8	94	64	4	10.8
	60	###	210	510	5300	170	10	114	78	4	16.8
	70	###	195	470	4000	190	10	134	95	4	20.8
	80	###	155	375	4000	210	10	144	##	4	27
	90	###	145	350	3000	230	10	158	##	5	40
	100	###	140	340	2400	270	10	182	##	5	67
	130	###	130	320	2400	310	12	212	##	5	94

NOTES
1) T _max = 2 × T _KN
» Refer to Selection page 10 to 13
2) This maximum allowable torque transmission speed
n max must not be exceeded when transmitting torque
3) This minimum allowable overrunning speed n imin
should not be reduced under continuous operation.
Possible reduction of this minimum speed on request
4) Inner race overruns
Keyway to DIN 6885.1
When ordering, please specify direction of rotation seen
from arrow &bdquo;A“: &bdquo;R“ Inner race overruns in clockwise
direction, &bdquo;L“ Inner race overruns in counterclockwise
direction
» Refer to mounting and maintenance instructions
page 16 to 19